Hello! I am trying to figure out how to build a structure with plastic and shade cloth only on the roof. I want to make it as hurricane proof as possible. 12ft 4x4's cemented 2ft into the ground, so 10 ft tall roof to fit a tractor underneath. Posts 10 ft apart (?), 7/12 (30 degree) pitch I read is best for wind. 2x6 rafters (?) every how many feet?...

Hello everyone! Recently bought my first house and can’t figure out for the life of me how to remove this lower sash. I watched a few videos and none of them particularly matched up with my type of window. Any help would be greatly appreciated! Sash in question: https://imgur.com/a/pTuOUZN submitted by /u/Garbage_McTrash [link] [comments]

There's about 8 of these holding up a shelf in a cheap chipboard pantry cabinet. The clearance is about 5mm above the head of the philips head screw. Have tried to fit an offset screwdriver (allen key type) in there but I couldn't buy one low profile enough at the local hardware (Bunnings in Australia). Any advice? Thanks in advance! https://preview.redd.it/rkd3eklx562d1.jpg?width=4032&format=pjpg&auto=webp&s=0f5659dc3584a330a578cb0f31ebbfd4bdf1ca07...

https://preview.redd.it/sqygstvyv52d1.png?width=1366&format=png&auto=webp&s=3f393e3e496bde901d18bb75d6686cc1c319e3e8 https://preview.redd.it/tn4mxpy1w52d1.png?width=1366&format=png&auto=webp&s=bcaf086ea285f307c1f8357e3bb3d586f47cf381 submitted by /u/ItsJadee9 [link] [comments]

Does anyone know what type of plant would cover these doors a look good? I’ve tried furniture paint - 2 were satin finish and 1 was metallic - but the satin looked too thick looking and the metallic just isn’t right. Wondering if anyone else has had success with a nice finish? submitted by /u/notroyaltyyet [link] [comments]

Moen Single handle shower handle is suddenly very difficult to shut off. How do you get the handle off in order to be able to get the cartridge out? Thanks! submitted by /u/tangodream [link] [comments]